WAHN NO.2
WAHN NO.2
Couldn't load pickup availability
Distinctive silver pendant with a melted surface and oxidized accents.
- Oxidized silver bridge placed in the center
- Handcrafted in Germany
- Material: 950 silver.
- Comes with an oxidized sterling silver chain (length: 60cm).
Measurements of the pendant:
Weight: 20 grams
Width: 10mm, length: 82mm
Each Necklace is individually crafted upon order.
Production time: approx. 3-4 weeks
Ring Size Guide
Option 1: You have a ring that fits you
If you have a ring that fits you well on the finger you want your new ring to sit, you can find out your ring size by measuring the ring that already fits you.
That´s how you do it:
- Place your ring on a flat surface
- Get your ruler and measure the diameter of the inside of your ring.
- Now write down the number and look up your ring size in the chart below. If you fall between sizes, pick the smaller one.
|
Diameter in mm |
EU ring size |
Diameter in inch |
|
14,0 mm |
44 |
0.55 in |
|
14,3 mm |
45 |
0.56 in |
|
14,6 mm |
46 |
0.58 in |
|
15,0 mm |
47 |
0.59 in |
|
15,3 mm |
48 |
0.6 in |
|
15,6 mm |
49 |
0.61 in |
|
15,9 mm |
50 |
0.63 in |
|
16,2 mm |
51 |
0.64 in |
|
16,6 mm |
52 |
0.65 in |
|
16,9 mm |
53 |
0.67 in |
|
17,2 mm |
54 |
0.68 in |
|
17,5 mm |
55 |
0.69 in |
|
17,8 mm |
56 |
0.7 in |
|
18,1 mm |
57 |
0.71 in |
|
18,5 mm |
58 |
0.73 in |
|
18,8 mm |
59 |
0.74 in |
|
19,1 mm |
60 |
0.75 in |
|
19,4 mm |
61 |
0.76 in |
|
19,7 mm |
62 |
0.78 in |
|
20,1 mm |
63 |
0.79 in |
|
20,4 mm |
64 |
0.8 in |
|
20,7 mm |
65 |
0.81 in |
|
21,0 mm |
66 |
0.83 in |
|
21,3 mm |
67 |
0.84 in |
|
21,6 mm |
68 |
0.85 in |
|
22,0 mm |
69 |
0.87 in |
|
22,3 mm |
70 |
0.88 in |
Option 2: You don´t have a ring that fits you
If you don´t have a ring that fits you well on the finger you want your new ring to sit, you can find out your ring size by measuring your finger.
That´s how you do it:
- Take a narrow strip of paper and wrap it around your finger where you want the ring to sit. Make sure the strip fits snugly around your finger.
-
Mark the point where the two ends of the paper strip overlap. Now cut off the rest of the strip.
-
To test whether you measured correctly, wrap the strip around your finger again. You should now see a small gap between the two ends of the paper strip. If the ends overlap, start again at step 1.
- Measure the length of the paper strip and determine your ring size using the table below.
|
Circumference in mm |
EU ring size |
Circumference in inch |
|
44 mm |
44 |
1.73 in |
|
45 mm |
45 |
1.77 in |
|
46 mm |
46 |
1.81 in |
|
47 mm |
47 |
1.85 in |
|
48 mm |
48 |
1.89 in |
|
49 mm |
49 |
1.93 in |
|
50 mm |
50 |
1.97 in |
|
51 mm |
51 |
2.00 in |
|
52 mm |
52 |
2.05 in |
|
53 mm |
53 |
2.09 in |
|
54 mm |
54 |
2.13 in |
|
55 mm |
55 |
2.17 in |
|
56 mm |
56 |
2.21 in |
|
57 mm |
57 |
2.24 in |
|
58 mm |
58 |
2.28 in |
|
59 mm |
59 |
2.33 in |
|
60 mm |
60 |
2.36 in |
|
61 mm |
61 |
2.40 in |
|
62 mm |
62 |
2.44 in |
|
63 mm |
63 |
2.48 in |
|
64 mm |
64 |
2.52 in |
|
65 mm |
65 |
2.56 in |
|
66 mm |
66 |
2.60 in |
|
67 mm |
67 |
2.64 in |
|
68 mm |
68 |
2.68 in |
|
69 mm |
69 |
2.72 in |
|
70 mm |
70 |
2.76 in |
Since option 2 can lead to unprecise results, I would recommend option 1 or getting your ring size confirmed by a local goldsmith.